FEATURES
1. One-piece bed adopts high strength iron to ensure rigidity and precision
2. Ultrasonic frequency quenched guide-ways ensure good wear-resistance
3. Headstock gears hardened and ground to achieve precision and low noise
Product main technical specifications:
Specification | Unit | CW6163E/CW6263E | CW6180E/CW6280E | ||
Swing over bed | mm | 630 | 800 | ||
Swing over gap | mm | - | 800 | - | 1000 |
Swing over cross slide | mm | 350 | 520 | ||
Distance between centers | mm | 1500/2000/3000/ 4000/5000/6000 | 1500/2000/3000/ 4000/5000/6000 | ||
Guideway width | mm | 550 | 550 | ||
Max. load capacity | T | 3 | 3 | ||
Spindle bore | mm | 104 | 104 | ||
Spindle bore taper | - | Metric φ120/MT5 | Metric φ120/MT5 | ||
Spindle nose type | - | C11 | C11 | ||
Spindle speed steps | - | FWD. 18 steps | FWD. 18 steps | ||
Spindle speed range | rpm | 7.5-1000 | 6-800 | ||
Chuck | mm | φ315 3-jaw manual | φ315 3-jaw manual | ||
Turret/tool post | - | Manual turret 4 position | Manual turret 4 position | ||
Tool shank size | mm | 32 x 32 | 32 x 32 | ||
X axis travel | mm | 320 | 420 | ||
Z axis travel | mm | 1350/1850/2850/ 3850/4850/5850 | 1350/1850/2850/ 3850/4850/5850 | ||
X axis feed grade/range | mm/r | 64/0.05-12.15 | 64/0.05-12.15 | ||
Z axis feed grade/range | mm/r | 64/0.1-24.3 | 64/0.1-24.3 | ||
X axis rapid traverse | mm/min | 2300 | 2300 | ||
Z axis rapid traverse | mm/min | 4000 | 4000 | ||
Metric thread grade/range | mm | 50/1-240 | 50/1-240 | ||
Inch thread grade/range | T.P.I | 26/14-1 | 26/14-1 | ||
Module thread grade/range | mm | 53/0.5-120 | 53/0.5-120 | ||
DP thread grade/range | D.P. | 24/28-1 | 24/28-1 | ||
Tailstock quill diameter | mm | φ100 | φ100 | ||
Tailstock quill taper | - | MT5 | MT5 | ||
Tailstock quill travel | mm | 250 | 250 | ||
Main spindle motor | kW | 11 | 11 | ||
Rapid traverse motor | kW | 1.1 | 1.1 | ||
Coolant pump motor | kW | 0.125 | 0.125 | ||
Width x Height | mm | 1400 x 1450 | 1500 x 1450 | ||
Copyright © Shandong Luzhong Machine Tool Co.,Ltd. All Rights Reserved
