Home > Products > CNC Machining Center > CNC Vertical Machining Center
  • XH7136 Vertical Machining Center
  • XH7136 Vertical Machining Center
  • XH7136 Vertical Machining Center
  • XH7136 Vertical Machining Center
  • XH7136 Vertical Machining Center

XH7136 Vertical Machining Center


Product configuration:

Standard configuration: 

1.The CNC system: KND,GSK,Fanuc and etc.

2.The knife: The famous Taiwan tools changer

3.The unclamping cylinder: Taiwan Shangpin

4.The weight: Wuxi Xieqing nitrogen balance

5.The high quality castings: Resin sand casting

6.The spindle: Taiwan famous high speed spindle7.The screw: HIWIN8.The bearing: Japan NTN9.The Internal protection: Total or half protection

Select the configuration:

1.M70B/M70A Mitsubishi  FANUC 0i mate MD

2.The CNC dividing head

3.The taiwan famous brand manipulator knife storehouse

4.NC rotary table5.The chip cleaner

6.The fourth axis

7.The fifth axis

The main performance characteristics

1.The fuselage and main components are  high strength cast iron, microstructure stability, ensure the stability of machine tool for long-term use.

2.The column at the bottom of A type bridge type structure, combined with the big box base, greatly reduce  the vibration of machine on heavy cutting

3.The pre tension precision ball screw drive

4.The high speed, high precision, high rigidity spindle unit

5.The design of oil-water separation

6.The intermittent automatic lubrication

7.Automatic scraping knife system


The vertical machining center can be applied to many fields such as mechanical processing and mould manufacturing, canadapt from roughing to finishing processing requirements, has the characteristics of high precision, high efficiency, is widelyused in aerospace, military industry, mould, automobile, internal combustion engines, textile machinery, chemical machinery processing, oil, electronics and other industries.

Product main technical specifications:

Table sizemm1250×360
Table maximum loadkg300
T slot(number-width-pitch)
X axis travelmm900
Y axis travelmm350
Z axis travelmm500
Distance from spindle axis to column surfacemm460
Distance between spindle nose and worktablemm100-600
X/Y rapid traversem/min10
Z rapid traversem/min8
Cutting feedMm/min1-2000
Max.spindle speedrpm8000
Spindle taper
Main motor powerkw5.5
Tools type
Armless type
Machine dimensionmm3000x2400x2500
Machine weightkg2600


Tengzhou Luzhong Machine Tool Co., Ltd.

Powered by

Copyright © Tengzhou Luzhong Machine Tool Co., Ltd. All Rights Reserved